menhir

Menhir

Meet the Menhir

  • menhir2
  • menhir1
  • menhir3
  • menhir4

The Raven Menhir is a very unique design. Most large speakers can be very dynamic, but the Menhir is also very delicate, intimate and precise.

The Raven R3.2MMX ribbon covers all midrange and treble above 800 Hz. This is the most critical range for imaging and intelligibility. Covering this entire frequency range with a single ribbon is important to a coherent presentation. The special MMX ribbon material is 6 times stronger than common aluminum so it is very robust and can play much louder without distortion.

Bass is produced by six 10 inch woofers that move a lot of air effortlessly with minimal distortion. For maximum dynamic speed the woofers exhibit exceptionally low mass and low inductance. The cones are made of a light weight cellulose coated on both sides with curvilinear profile.

To extract the best performance from the woofers we developed a new type of cabinet design. The woofer cabinet is a transmission line with progressive damping and exponential taper. It is a virtual acoustic black hole without resonance modes and no reflections. The proportions and damping design are considerably different from a conventional transmission line. The performance benefit is greater clarity, speed and detail. Resonance is so well controlled that the impedance is nearly flat making it a very easy load for a SET tube amplifier.

Like our award winning Ebb, the Menhir has a cardioid radiation pattern in the bass. A cardioid radiation pattern reduces room bass resonance and makes speaker placement much easier.

To optimize performance and get the best possible room acoustic integration we include a DEQX digital processor.


PRICING

Starting at $36,000

ORDER NOW

Download

The Menhir Specification Sheet

Download Here


Available Finishes

Available finishes for the Ebb include:

Black, or Custom Finish.

  • Black
  • Custom

Specifications


SPECS

  • SENSITIVITY
    96 dB 2.83 volt 1 meter
  • NOMINAL IMPEDANCE
    6 ohms
  • MINIMUM IMPEDANCE
    4 ohms
  • FREQUENCY RESPONSE
    +/-2 dB 20Hz to 40kHz with DEQX
  • MIN AMPLIFIER POWER
    50 watts = 113 dB peak at 1 meter
  • MAX AMPLIFIER POWER
    300 watts = 120 dB peak at 1 meter
HARDWARE

  • CROSSOVER
    Axon capacitors and air core inductors 800 Hz
  • CABINET
    Transmission line with cardioid bass radiation pattern pressure formed wood with 6 internal braces
  • WIRING
    Axon solid core
  • TERMINALS
    5 way binding post two for Bi Ware
DIMENSIONS

  • HEIGHT
    72.5 inches (+2 inches with aluminum stilettos)
  • WIDTH
    13.5 inches
  • DEPTH
    23 inches
  • WEIGHT
    265 lbs.
DRIVERS

  • TWEETER
    Raven R3.2MMX pure ribbon driver
  • WOOFER
    Six 10 inch with light weight cellulose curvelinear cone coated on both sides